Single-Sided PCB Manufacturer
Get cost-effective single-sided PCBs manufactured to your circuit design, material, and assembly requirements. LZJPCB supports FR4, CEM-1, and aluminum substrates with custom drilling, surface finishes, and PCB assembly from prototype to volume production.
- FR4, CEM-1 & Aluminum PCBs
- Custom Drilling & Board Shapes
- SMT & Through-Hole Assembly
- 100% Electrical Testing
Single-Sided PCB Materials & Construction
Choose the right substrate and board thickness to meet your circuit performance, assembly, and cost requirements.
Single-Sided PCB Materials
Match your electrical, thermal, and cost requirements with FR4, CEM-1, or aluminum-based single-sided PCBs.
- FR4 for electrical insulation and durability
- CEM-1 for cost-sensitive PCB designs
- Aluminum for LED and power applications
- Custom copper weight & surface finishes
Single-Layer PCB Thickness
Get your single-sided PCBs manufactured to the thickness and dimensional requirements of your enclosure, connectors, and assembly.
- Custom board thickness & tolerances
- FR4 thickness: 0.4–4.0 mm
- Aluminum thickness: 0.8–3.2 mm
- Mounting holes, routing & V-cut options
Single-Sided PCB Design & DFM Support
Avoid routing conflicts, unnecessary jumpers, and assembly issues with engineering reviews before PCB manufacturing.
Optimize Your Single-Layer PCB Design for Manufacturing
Your component placement, traces, jumpers, and mechanical requirements are reviewed to simplify production and reduce unnecessary costs.
Optimize component positions to reduce trace crossings and routing complexity.
Minimize jumpers and additional assembly steps.
Verify current capacity, pad dimensions, and electrical clearances.
Check hole sizes, connector positions, and board dimensions.
Compare single-sided and double-sided designs to reduce total manufacturing and assembly costs.
Single-Sided PCB Applications
From appliance controls to LED indicators, get single-sided PCBs manufactured for your circuit, component, and cost requirements.
Simple Control & Interface Boards
Keep switches, relays, connectors, and control circuits on a single copper layer for straightforward assembly and reliable electrical connections.
Power Distribution & Drivers
Support your power and driver circuits with suitable copper thickness, trace widths, electrical clearances, and thermal management.
Consumer & Appliance Electronics
Reduce PCB manufacturing costs for household appliances and consumer electronics with simple circuit layouts and repeatable production.
Indicators, Keypads & Simple Lighting
Fit LEDs, buttons, and indicator circuits into compact panels with custom PCB shapes, precise component placement, and mounting holes.
Single-Sided PCB Quality Control & Testing
Avoid assembly defects and production delays with copper pattern inspection, dimensional checks, and 100% electrical testing before delivery.
Quality Checks for Your Single-Sided PCBs
Your PCB materials, copper traces, holes, and surface finishes are inspected to identify manufacturing defects before assembly.
Check FR4, CEM-1 or aluminum substrates, copper thickness, and material quality.
Detect open traces, shorts, etching defects, and solder mask misalignment.
Verify hole sizes, PTH/NPTH requirements, board outlines, and tolerances.
Test every PCB for continuity, isolation, open circuits, and shorts.
Inspect pad finishes, solder mask, markings, and final board quality.
Why Choose LZJPCB as Your Single-Sided PCB Manufacturer?
With 20 years of PCB manufacturing experience, 50+ engineers, and four production bases, LZJPCB helps you control manufacturing costs and support repeat production.
Get your single-sided PCBs manufactured and assembled with flexible material options, engineering support, and scalable production.
- Lower Your Total PCB Production Costs — Reduce unnecessary manufacturing and assembly costs through material selection, routing optimization, and efficient panelization.
- PCB Manufacturing & Assembly in One Place — Get FR4, CEM-1, and aluminum PCBs manufactured, assembled, and tested without managing multiple suppliers.
- Reliable Supply from Prototype to Volume — Move from samples to repeat orders with established production capacity, consistent specifications, and quality control.
Single-Sided PCB Case Studies
See how single-sided PCB manufacturing addresses circuit layout, assembly costs, and electrical requirements for different products.
Appliance Control Board
Fit relays, switches, and connectors on one copper layer while minimizing jumpers and assembly costs.
Optimized component placement, copper routing, and through-hole assembly.
Verified PCB specifications, production quantity, and 100% electrical test results available upon request.
Power Interface Board
Handle required current loads while maintaining adequate trace widths, electrical clearances, and thermal performance.
Appropriate copper thickness, power trace optimization, and electrical testing against released net data.
Verified current requirements, copper specifications, and electrical test results available upon request.
Get a Single-Sided PCB
Manufacturing Quote
Scan to add us on WeChat
Open WeChat → Scan QR Code
Send an Inquiry
Fill in the form below and our team will get back to you within 24 hours.
Frequently Asked Questions About Single-Sided PCB
Choose one copper layer only when it keeps routing, assembly and mechanical requirements clear.
What Is a Single-Layer PCB?
A single-layer PCB has patterned circuit copper on one side of a dielectric base. Components may be installed according to the approved assembly design, but all routed circuit copper remains on the same face; jumpers may cross nets when the layout needs them.
Single-Sided vs Double-Sided PCB
Choose single-sided when one copper face can complete the routing with a practical jumper and assembly strategy. Choose double-sided when the design needs copper on both faces and plated interconnection for more routing flexibility.
- Decision
- Single-Sided PCB
- Double-Sided PCB
- Conductor layers
- One circuit copper side
- Two circuit copper sides
- Interconnection
- No layer-to-layer via requirement
- PTH / vias connect selected features
- Routing density
- Lowest; crossings may require jumpers
- More routing and placement flexibility
- Cost decision
- Simpler route when the design truly fits
- Added process justified by routing / assembly needs
When should a design move from one layer to a multilayer PCB?
Is 1.6 mm the standard single-layer PCB thickness?
What affects single-sided PCB price?
Can LZJPCB review a single-sided PCB before quotation?
Send your Gerber files, material, thickness, and quantity. Receive a manufacturing scope with fixed pricing and lead time.
